Thailand

Stainless Steel
ANSI AS Chain


 

Home » Products » Chain » Drive Chain » Anti Corrosion Chain » AS Series » ANSI AS

 

ANSI AS Chain

The pins and rollers of this roller chain are made of precipitation-hardened, tempered stainless steel (SUS600). The link plates and the bushes are made of SUS304 stainless steel (spring clips are SUS301). The Maximum Allowable Load is 1.5 times that of ANSI SS chain. Corrosion resistance is slightly lower than standard SS chain. This chain is suitable where corrosion and heat resistance is required in a heavy duty drive application and where a smaller ANSI SS chain is preferred. Magnetism exists due to the use of precipitation-hardened SUS600. The working temperature range: -20°C to +400°C.

For more detailed information and to download CAD data about click here

as

Single Strand Details

tsubaki-ansi-as-single
Dimensions-mm
Tsubaki Chain No. Pitch (P) Roller Diameter Inner Width
mm Inch R W
RS40-AS-1 12.70 ½" 7.92 7.95
RS50-AS-1 15.875 ⅝" 10.16 9.53
RS60-AS-1 19.05 ¾" 11.91 12.70
RS80-AS-1 25.40 1" 15.88 15.88
Dimensions in mm
Tsubaki Chain No. Pin Link Plate
Diameter Length Offset Pin Length Thickness Height
D L1 L2 L T H
RS40-AS-1 3.97 8.25 9.95 18.60 1.50 12.00
RS50-AS-1 5.09 10.30 12.00 23.90 2.00 15.00
RS60-AS-1 5.96 12.85 14.75 29.40 2.40 18.10
RS80-AS-1 7.94 16.25 19.25 39.00 3.20 24.10
Dimensions in mm
Tsubaki Chain No. Max. Allowable Load
kN
Approx. Mass
Kg/m
RS40-AS-1 0.69 0.64
RS50-AS-1 1.03 1.04
RS60-AS-1 1.57 1.53
RS80-AS-1 2.65 2.66
  • Connecting links are clip type for sizes up to RS60-AS, and cotter type for size RS80-AS.
  • For details on corrosion resistance selection, please consult our Corrosion Resistance Guide.